Show your basement mods

[OIF/OEFveteran]

Now there are a lot of great ideas in here. Thanks........... But where is everyone putting like 2 lounge chairs or even a couple folding chairs??

Haha... In the bathroom, of course!

[Agpopp]

Not sure if you guys have seen this done but I carry a collapsing leg table for extra prep and party space. I made these brackets out of scrap 1/2 plywood with a longer flange at the top so you can screw through it and then into the aluminum floor joists. I spaced it with about a half inch of play to make it slide easy.
Hope someone can use it.

Sent from my SM-G900V using Tapatalk

[Cate&Rob]

Andrew - Love the table storage . . . going to "borrow" that idea .

Rob

[burgpath]

Nice, very well done.

[Dalek20]

With the information, I google central vac pipe strap. Here is the result. I paid $10.25 for 4. That is $3.00 for the parts and $7.25 for shipping.

https://www.centralvac.com/installat...ipe-strap.html

Thanks for the info. I also like the table slid show later in the thread... that will be my Easter vacation build.

[Waukesha1]

Finished the Left side on my 310GK.

[Hwktlg8]

replaced the angled basement wall today with black melamine. Love this mod- gained 2more feet of storage. Also placed a lexan window in the same wall that allows easy visualization of mechanicals behind the wall. Hinged so easy access as well. 377MBS-R

[roady1]

replaced the angled basement wall today with black melamine. Love this mod- gained 2more feet of storage. Also placed a lexan window in the same wall that allows easy visualization of mechanicals behind the wall. Hinged so easy access as well. 377MBS-R

Just did the same with my 350M a few weeks ago. A very good mod for sure.

[cpaul.moss]

REAL EASY JOB .....I'm glad I did it,now its a two second job to peek back there and make sure the water system is working correctly. Also The drain tube from the pan will be easy to see if its dripping ect .. I think today I might make the drip tray for the water heater. I've seen a ton of rv water heaters that just had a tiny drip there and rotted wood. Anything to help prolong the beast ...

Have you posted details on your basement hinge mod? It looks really well done. I’d like to know how you did it?


Sent from my iPad using Tapatalk

[Buckskin]

[QUOTE=Agpopp;154381]Not sure if you guys have seen this done but I carry a collapsing leg table for extra prep and party space. I made these brackets out of scrap 1/2 plywood with a longer flange at the top so you can screw through it and then into the aluminum floor joists. I spaced it with about a half inch of play to make it slide easy.
Hope someone can use it.

Sent from my SM-G900V using Tapatalk
[/QUO
Great idea!!TE]