Bathroom Mod

[powerscol]

This has probably been asked but I will throw it out there anyway. The towel racks and similar items like that, how are you attaching those to the wall as I know you could not be using conventional methods. Thank you in advance for your insight and information.

So folks know - these are good anchors for our thin walls. the link is to a 100 box, but some hardware stores carry them. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[TheLexx]

So folks know - these are good anchors for our thin walls. the link is to a 100 box, but some hardware stores carry them. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Have you actually used these yet? They seem like they have to go into the wall too far before the toggle spreads out. Our walls just don't have much depth to them.

[powerscol]

Yep and they do fine. Numerous others here have mentioned using them too. Most hardware stores (none in my remote area stocked them) and Lowe's carry them in the 5 pack.

[TFB176602]

Best mod we've done to the bathroom is to toss that POS Thetford toilet and replace it a Dometic Series 320. Major improvement (especially for the guys )

I am wanting to replace the toilet in my 310GK but it is still in storage till the end of next week and I would like to get this ordered right away. Do you know if the location of the toilet in the bathroom is the same distance from the wall on all Solitude units? From what I have read, that Dometic 320 requires a minimum of 11 inches from wall.

[Paul & Deb]

I am wanting to replace the toilet in my 310GK but it is still in storage till the end of next week and I would like to get this ordered right away. Do you know if the location of the toilet in the bathroom is the same distance from the wall on all Solitude units? From what I have read, that Dometic 320 requires a minimum of 11 inches from wall.

I can't help with the differences in the BR measurements between our rigs but the Dometic is right up against the wall but not pressing on it. I have a clear silicone bumper on the wall where the seat cover touches when open. We've traveled probably 6,000 miles since I installed mine last summer and we still love it and there are NO Signs of it being to close to the wall.

[Dick Noble]

I put in a Dometic 310. No problems.

[Ed and Cathy K]

[QUOTE=Poppy's 5th Wheel;159558]I can't help with the differences in the BR measurements between our rigs but the Dometic is right up against the wall but not pressing on it. I have a clear silicone bumper on the wall where the seat cover touches when open. We've traveled probably 6,000 miles since I installed mine last summer and we still love it and there are NO Signs of it being to close to the wall.

Amen Amen !!!!

[HeidiHome]

Hi Mikeandlibby, really like your tiles in bathroom mod post! Would like to copy you, how is that holding up? Thanks for the idea!

[VinceB]

Once again, great info from this site. It looks like I’m going to have to spend some more money doing bathroom mods. Great job everybody.