Ball height

[Chas55]

Hi. I'm picking up my Imagine 2600 in a couple weeks and I'd like to know the height of the hitch ball coupler so I can get a starting point and the final adjust
Thanks
Charlie

[TucsonJim]

Charlie - I think the frame on your 2600 is the same as my 297 reflection. My hitch ball height when the trailer is level is 25".

[Chas55]

Ok thanks that should get me close
Charlie

[Dalezz]

I have the same question and just want to clarify, is that at the top of the ball or where the ball mounts on the base.
Thanks

Dale

[klenger]

If you have access to the trailer, (or someone else can get the measurement), the top of the coupler (when level) is the same distance from the ground as the bottom of the frame at the axles. Getting the measurement at the axles basically eliminates the issue of leveling the trailer to get the coupler height. Any other height measurements at the coupler are then pretty simple arithmetic.

I have noticed that the trailer does settle somewhat (more than an inch I think) as you load it with your stuff and water.