User Tag List
Thanks: 0
Likes: 0
Results 1 to 10 of 13
Thread: generators in parallel
-
12-12-2017, 08:40 AM #1
- Join Date
- Oct 2017
- Location
- Clinton NJ
- Posts
- 20
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
generators in parallel
I tried searching for an answer, but didn't find it. I'm a novice when it comes to electronics. I know for many generators you can run the same brand in parallel. But can you run different brands together? And if yes, different wattages?
-
12-12-2017, 09:17 AM #2
- Join Date
- Jul 2017
- Location
- Ft. Myers, FL
- Posts
- 794
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
The biggest difference would be physical connectors. I ended up purchasing two Champion 2800/3100 inverters. While researching it, I looked at the Harbor Freight Predator inverter, but it didn't have a 50A parallel kit. I looked at Champion's 50A parallel kit, and with the exception of the physical plugs it looked like it would work. However, since I didn't want to run the risk of a fire or other problem, I simply ponied up the additional money and bought the Champions.
2016 Grand Design Reflection 313RLTS
2020 Riverstone 39FK
2016 Ford F350 Super Duty 6.7L Powerstroke Lariat 2WD DRW
-
12-12-2017, 09:23 AM #3
- Join Date
- Oct 2017
- Location
- Clinton NJ
- Posts
- 20
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
well, punting is always an option. But I have a Yamaha, so it's a pricey one...
-
12-12-2017, 05:09 PM #4
- Join Date
- Nov 2017
- Location
- Washington State
- Posts
- 309
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Honda makes a parallel kit. Don't remember if they have the 50 amp connector. We went with the Onan 5500 mounted in the front storage space and a transfer switch. Runs off propane
Lyle & Judy and Annie the Westie
Retired (Government employee/USMC/USAFR, Ret) & Retired (insurance industry)
2018 F-350 CC LB DRW 4X4 6.7 (3.55)(Reese 18k "puck system")
2018 Solitude 310GK (5500 Onan Genset)
2020 F-150 SCSB XLT 2.7L 10 speed
-
12-14-2017, 06:56 AM #5
- Join Date
- Oct 2017
- Location
- Clinton NJ
- Posts
- 20
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Yamaha makes one too. I Have a 2000 watt now, and I'm more interested in the capabilities/limitations of adding a second one in as cost effective a way as possible. The Onan is way too pricey for me.
-
12-14-2017, 08:32 AM #6
- Join Date
- Apr 2017
- Location
- Central Oregon
- Posts
- 573
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I had two 2K watt Champion generators that I used in parallel. They worked fine but were a PITA. It takes twice as long to set up, takes up nearly twice as much space in the RV and uses much more fuel than a single larger generator....plus now you are filling two generators instead of just one. I ended up getting a 3500 watt champion with remote start. It runs everything I was running with the two 2K watt gens, including the AC, takes up 1/2 the space and I can start it from inside the trailer when I need it. Much better set-up IMHO.
Randy & Sharon (Went full time April 14th 2017)
2016 Ram CC SB Outdoorsman 4x4 CTD
Michelin 295/70R18
Fold-A-Cover G4 tonneau,
Dee Zee truck bed mat,
Dee Zee tailgate assist,
Dodge Ram 4x4 Steering Gear Box Brace
Fumoto oil drain valve,
Husky floor liners,
WeatherTech No Drill Mud Flaps,
Firestone Ride-Rite Suspension Kit
Reece Pro Series 20K lb 5th wheel hitch
2018 Solitude 375res
8K lb axles, springs & hubs with Nev-R-Lube bearings
MORryde HD shackle kit with brass bushings & wet bolts
Reece Sidewinder 19K lb pin box.
-
12-15-2017, 11:43 AM #7
- Join Date
- Nov 2017
- Location
- Washington State
- Posts
- 309
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Have not priced 2 generators vs the Onan. Had a 4kw Onan in last 2 5vers as they had only 1 a/c. New unit has 2 a/c so went with the 5500. Total price of installing, transfer switch, remote start and propane carb was about $5k. For me the price was ok. But it all depends on what works for you. One recommendation with onboard generators is to buy the genturi exhaust stack. Takes exhaust up to the top of the unit. Never had the CO2 go off using the genturi
Lyle & Judy and Annie the Westie
Retired (Government employee/USMC/USAFR, Ret) & Retired (insurance industry)
2018 F-350 CC LB DRW 4X4 6.7 (3.55)(Reese 18k "puck system")
2018 Solitude 310GK (5500 Onan Genset)
2020 F-150 SCSB XLT 2.7L 10 speed
-
12-15-2017, 03:14 PM #8
- Join Date
- Dec 2017
- Location
- Ontario, Canada
- Posts
- 212
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
The paralleled honda 2000's have a 30 amp connection. When I got them u had to purchase the parallel kit separate but now they make a companion 2000 watt that has the 30 amp plug on it. For the amount of boondocking I do it works fine for me and if I don't need ac I just run one Genny. I also have an extended run tank that hooks up to both gennies
John & Joanne
2018 Solitude 374TH
2018 GMC 3500HD Duramax CC DRW
2001 Harley Ultra Classic
-
12-15-2017, 04:26 PM #9
-
12-15-2017, 07:45 PM #10
- Join Date
- Jul 2017
- Location
- Ft. Myers, FL
- Posts
- 794
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
This one states it is Champion compatible, and available at Northern Tool: http://www.ipiindustries.com/service...ded-run-tank-1
2016 Grand Design Reflection 313RLTS
2020 Riverstone 39FK
2016 Ford F350 Super Duty 6.7L Powerstroke Lariat 2WD DRW
Similar Threads
-
Champion generators
By Fisherman1947 in forum General DiscussionReplies: 20Last Post: 11-01-2018, 09:02 AM -
Reliance parallel kit
By dirtclod in forum Electrical System and WiringReplies: 0Last Post: 05-09-2016, 06:17 PM -
getting the 303 and now the generator or generators
By fishkiller1 in forum New To RV'ing, Purchase Questions & General ConcernsReplies: 18Last Post: 04-14-2016, 07:55 AM
RV Lock vs Lippert Entry Lock?
Today, 01:34 PM in General Tech Topics