Battery light on panel

[jmalbre39]

on our panel only one of the 4 battery lights , lite but when we check on the lippert control for the leveling it shows the battery at 12.1 volts, what could be wrong and how do we fix it.

[BabyBober]

You have a low battery. Is the unit plugged in? If you shut off the battery switch do you get lights in the camper while plugged in? If not then you have a. Bad converter

[315RLTS in PA]

Low battery
12.7 volt=100%
12.4 volt=75%
12.2 volt=50%
12.0 volt=25%
11.9 volt=dead

[Cate&Rob]

Low battery
12.7 volt=100%
12.4 volt=75%
12.2 volt=50%
12.0 volt=25%
11.9 volt=dead

And, this is measured directly across the battery terminals with no other loads on the battery. Picking up a voltage on some circuit that might have other draws and/or resistance in connectors could give an incorrect reading.

Rob

[BabyBober]

And, this is measured directly across the battery terminals with no other loads on the battery. Picking up a voltage on some circuit that might have other draws and/or resistance in connectors could give an incorrect reading.

Rob

That is why I recommended tapping the same leads that the push button battery minder looks at.