User Tag List
Thanks: 0
Likes: 0
Results 1 to 10 of 10
Thread: Leveling system issues
-
03-19-2018, 03:16 AM #1
- Join Date
- Mar 2018
- Location
- Franklinton NC
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Leveling system issues
Just came back from four days camping with no issues. Got the camper home and disconnected the truck like normal and hit the auto level button. The front dropped all the way down and the right front kept trying to go farther but was physically impossible. Finally went into alarm and stopped. Tried numerous things but nothing works. Of course all of the manuals for the Lippert system are not correct for my camper and even the online manuals on the control system in the camper are not correct .
Is there a way to rezero or reset the system?
If I put the system in manual and got it almost level, them hit the auto level it would work, but when I retracted everything and started over it would repeat what happened above again and go into alarm.
Leaving in a couple weeks on vacation, won't have time to take it to the dealer.
thanks in advance.
2017 Momentum 350M
-
03-19-2018, 05:32 AM #2
- Join Date
- Dec 2017
- Location
- Ontario, Canada
- Posts
- 212
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
When you hit auto level was the trailer nose high?
John & Joanne
2018 Solitude 374TH
2018 GMC 3500HD Duramax CC DRW
2001 Harley Ultra Classic
-
03-19-2018, 07:26 AM #3
- Join Date
- Mar 2018
- Location
- Franklinton NC
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-19-2018, 09:19 AM #4
- Join Date
- Feb 2017
- Location
- Ontario, Ohio
- Posts
- 485
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Joe & Dee
Ontario, Ohio
2018 Chevy 3500HD LTZ Duramax Crew Cab SRW Short Bed Payload 3523#
2019 Reflection 337RLS bought February 2019 Dry Pin Weight = 2,320#, UVW = 11,100#
Hitch - PullRite Super Glide 2700 - 16K
Bed Cover - Roll-N-Lock
TPMS - Tire Tracker TT-500 (non flow thru)
Rear Observation Camera - Rear View Safety model RVS-155W-FB (2400-2500MHZ)
2017 303RLS bought April 2017 / Traded February 2019
Map represents States visited with our 303RLS /337RLS
-
03-19-2018, 09:51 AM #5
- Join Date
- Jun 2017
- Location
- East Tennessee
- Posts
- 312
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have had that issue by extending the jacks too far before I start autolevel. When it can't go low enough on the front jacks (they are all the way up) then autolevel fails.
Steve and Peggy
Based in beautiful East Tennessee
2016 Reflection 337RLS
2017 Ram 3500 CCSB 4x4 CTD
-
03-19-2018, 11:17 AM #6
- Join Date
- Mar 2018
- Location
- Franklinton NC
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-19-2018, 11:19 AM #7
- Join Date
- Mar 2018
- Location
- Franklinton NC
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Only way I could get it to work was to get it level manually then hit the auto level and it would work, but it is was not within a couple degrees of each other it would fail
-
03-19-2018, 11:26 AM #8
- Join Date
- Nov 2013
- Location
- Sitting in the sun! FL for along while
- Posts
- 8,061
- Blog Entries
- 19
- Mentioned
- 90 Post(s)
- Tagged
- 0 Thread(s)
Could your level be off too much from side to side. Have heard of before that being a problem and people have had to put boards under one side to get it close enough for the auto level to work.
Marcy & Gary
2014 Grand Design - Reflection 303RLS
2022 GMC 3500 Denali Duramax Longbed SRW
2015 GMC Denali 3500 - Retired
2003 F350 - retired
Michigan
We're in trouble now, the dog are bloggin'!
https://3dogsandatrailer.wordpress.com/
-
03-19-2018, 11:34 AM #9
- Join Date
- Jul 2015
- Location
- Quartzsite until April
- Posts
- 577
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I have found the system has problems with more than about 1.7 or 1.8 degrees side to side. When pulling into a spot with side slope before unhitching I check, if the system shows more than 1.5 degrees I used blocks.
[QUOTE=WhittleBurner;154309]Could your level be off too much from side to side. Have heard of before that being a problem and people have had to put boards under one side to get it close enough for the auto levelColan and Marilyn Arnold
Des Moines, IA - kind of, on the road full time.
Currently in Durango, Colorado
Momentum 350M originally, now a 397TH
-
03-19-2018, 03:41 PM #10
- Join Date
- Mar 2018
- Location
- Franklinton NC
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I never had to use blocks before, trailer is parked at the same spot for the last year, wonder why it got picky about it now? I will try a board under it to see if it goes away.
thanks
Industry Looking for Lithium...
Today, 01:57 PM in Electrical System and Wiring