User Tag List
Results 1 to 10 of 43
Thread: Short bed towing
-
04-21-2018, 06:39 PM #1
- Join Date
- Apr 2018
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Short bed towing
I have a Ram 3500 with the 6'4" bed. Planning the anderson ultimate 3220 hitch. Is a Solitude different from Reflection towability with the short bed?
-
04-21-2018, 07:28 PM #2
- Join Date
- Aug 2017
- Location
- Crosslake, MN
- Posts
- 397
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Can you provide more specifics about your Ram? Diesel or Gas? SRW or DRW? Axle ratio? Also which specific Reflection or Solitude model are you considering? The Solitude weighs more, has higher hitch pin weights, is wider, is taller and can carry more cargo. Depending on these factors, the towability may be different between them.
2018 Reflection 28BH
Andersen Ultimate Hitch ISR Version
Predator 3500W Inverter Generator
2017 Ram 3500 Mega cab SRW w/6.4L Hemi, Ramboxes, Active Air Rear Suspension
2017 Aluma 8214HS
2015 Lund Crossover 1775 XS
-
04-21-2018, 09:48 PM #3
- Join Date
- Apr 2018
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Yes, thanks. 6.7 liter diesel w/aisin trans, 3.42 axle ratio, SRW. Torn between Solitude 310GK, or the Reflection 320MKS or 337RLS
-
04-21-2018, 10:44 PM #4
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,118
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
If you're just asking about the differences between the Reflections and the Solitudes, the Solitudes are wider - which will further restrict the angle you can achieve between the truck and trailer when turning (forward or backing). With our Reflection, and when we were running an Andersen in a GMC with a 6'6" bed, we had to position the hitch ball to the rear and turn the adapter around so it was behind the king pin. This effectively reduces the radius of the pin box and was to prevent contact with the bed rails when turning. I could get the truck and trailer to about a 75 - 80 degree angle with that setup. I doubt you would be able to accomplish that with the wider-bodied Solitudes.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
04-22-2018, 04:58 AM #5
- Join Date
- Feb 2018
- Location
- North Texas
- Posts
- 327
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have a Solitude 379 and a short bed ford. I use the B&W Companion slider with under-mount turnover ball system. Works great.
Sent from my iPhone using Tapatalk2017 Grand Design Solitude 379fls-r
2015 F250 FX4 6.7
-
04-22-2018, 08:35 AM #6
- Join Date
- Apr 2018
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Yes, turning capability with the Anderson + short bed was what I was after. Thanks for the Reflection info...anyone out there using a similar setup on the wider Solitude?
-
04-22-2018, 08:53 AM #7
- Join Date
- Feb 2018
- Location
- North Texas
- Posts
- 327
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
It’d be very, very tight. I wouldn’t do it. I’d get a slider so you wouldn’t have to worry about it.
Sent from my iPhone using Tapatalk2017 Grand Design Solitude 379fls-r
2015 F250 FX4 6.7
-
04-29-2018, 10:34 PM #8
- Join Date
- Apr 2018
- Location
- West Coast
- Posts
- 14
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
04-30-2018, 07:36 AM #9
- Join Date
- Mar 2018
- Location
- Colorado
- Posts
- 78
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I have a 2013 Ram 2500 Crew SB with a 6.7 and using the Andersen Ultimate with a Solitude 310gk, have only towed twice once from the dealer in Utah back to Co. in real bad wind and blowing snow and from my house to a dealer in Fountain. Have had no issues. Adding Airbags this week thou. I have the ball mount on the pin hitch facing forward.
-
05-01-2018, 11:08 PM #10
- Join Date
- Apr 2018
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Ok, thanks Torch!....could you send a pic of how it looks? Have you been able to make a 70 degee turn?
[email protected]
Plastic on Recliners?
Today, 12:48 PM in Interior