User Tag List
Thanks: 0
Likes: 0
Results 11 to 18 of 18
-
01-13-2019, 10:20 PM #11
- Join Date
- Aug 2018
- Location
- Oregon
- Posts
- 143
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
We had a High Pointe microwave in our previous trailer. It died, I checked on a replacement and found it was too expensive for a cheap microwave. I took it out and measured it. Took measurements with me whenever we were out and about and found a unit that would fit for about $50 and installed it. The only modification I had to do was put a small spacer under it so it matched trim height. Worked out perfect for very little hassle.
John and Karyn
Hillsboro, Oregon
2020 Reflection 150 Series 295RL
-
01-13-2019, 10:56 PM #12
- Join Date
- Feb 2018
- Location
- SW Colorado
- Posts
- 2,673
- Mentioned
- 42 Post(s)
- Tagged
- 1 Thread(s)
As John mentioned equivalent size units can be found, so look around. The one in our 220RK is very small, but there appears to be room for a larger one with a bit of trimming. Many home units come with trim strips or they can be gotten so fitment can be easy, especially the wall or under counter mounting ones.
Hope this helps2018 Reflection 150 Series 220RK 5th wheel with 6K axle upgrade. B&W 25K OEM Companion, Steadyfast system, 2022 F350 SRW 6.7 King Ranch 8' bed, Trailer reverse lights, rear spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, and Solar
-
03-01-2021, 06:31 PM #13
- Join Date
- Mar 2021
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have a High Pointe microwave oven in my RV, in less than 1.5 years, I have had to take the 70lbs oven down, disassemble, replace fuse, reassemble, and re-install. I would not recommend High Pointe ovens. My rating would be 1-star, only because you can’t give zero stars.
-
03-01-2021, 09:29 PM #14
- Join Date
- Mar 2019
- Location
- Tampa Florida
- Posts
- 2,047
- Mentioned
- 103 Post(s)
- Tagged
- 0 Thread(s)
On our last trip we tested the Convection portion of our High Point unit, Wife was not happy with the heat distribution of the unit. Consequently, I will soon be measuring our unit and looking for a "Retail" unit that will fit the space (shouldn't be too hard as it looks to be std 30 inch width.
Removing the old unit and installing a new unit will be a simple matter of installing a new back plate and ensuring the mounting holes line up on the new unit.David and Peggy
2019 Ford F350 Lariat, 6.7L Diesel, Dually, Long Bed
Running with 20k Reese Goosebox (Love It) and Ford Factory "Puck" system.
Stopping with 8,000 lb Disc Brakes and Titan Hydraulic over Electric Brakes system.
Powering all this fun with 1200 Watts of Solar, two Tesla, Model S, battery modules, 24 volt Victron Inverter.
2018 Solitude 310 GK
-
03-02-2021, 06:23 AM #15
Before you replace it, are you sure it wasnt operator error? You have to preheat it to properly use it as a convection oven. Once we figured out that part we loved it except for the fact it kept dying. To preheat it, you set it for convection mode and the temp, and if I recall, there are little dashes that appear under the display, once the entire display has dashes under it, it is preheated. We used ours for everything from chicken to cake and cookies once we figured out the preheat part of it.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
03-02-2021, 06:38 AM #16
- Join Date
- Mar 2019
- Location
- Tampa Florida
- Posts
- 2,047
- Mentioned
- 103 Post(s)
- Tagged
- 0 Thread(s)
David and Peggy
2019 Ford F350 Lariat, 6.7L Diesel, Dually, Long Bed
Running with 20k Reese Goosebox (Love It) and Ford Factory "Puck" system.
Stopping with 8,000 lb Disc Brakes and Titan Hydraulic over Electric Brakes system.
Powering all this fun with 1200 Watts of Solar, two Tesla, Model S, battery modules, 24 volt Victron Inverter.
2018 Solitude 310 GK
-
03-02-2021, 06:55 AM #17
I'd be pretty unhappy with that. We place a stainless steel griddle in our gas oven to distribute the heat, might work in the convection oven. If you do replace it, it's not that hard, just heavy. I did have to replace the wall bracket when I replaced mine since they were a little different.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
03-02-2021, 07:04 AM #18
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,016
- Mentioned
- 187 Post(s)
- Tagged
- 0 Thread(s)
U.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
Breakaway Switch Question
Today, 04:10 AM in Axles, Brakes, and Suspension