Furrion range oven won’t light

[Schuess]

Just decided to use my Furrion range oven for the first time on our new Reflection. The oven doesn’t want to light. All 3 burners above light just fine.

I have a 2018 model which uses a clicker (sparked) to light the oven as well as the burners.
Any ideas?


Sent from my iPhone using Tapatalk

[FT4NOW]

Have you tried lighting the oven with a lighter? This will validate your propane flow to the oven burner. It could be the igniter is not providing spark by the oven burner or maybe it needs to be adjusted a little bit? Just guessing here as I don't have the Furion oven.

Sent from my SM-G950U using Tapatalk

[VTX-AL]

Rotate the oven control knob to the ignite position, push in and hold in while pushing the ignition clicker, then continue to hold the control knob "pushed in" for 10-15 seconds or so to allow the thermocouple to heat up and allow gas flow to the burner. Hope I am remembering this correctly as our '18 303RLS is currently at our storage facility.

...VTX-Al

[Schuess]

Rotate the oven control knob to the ignite position, push in and hold in while pushing the ignition clicker, then continue to hold the control knob "pushed in" for 10-15 seconds or so to allow the thermocouple to heat up and allow gas flow to the burner. Hope I am remembering this correctly as our '18 303RLS is currently at our storage facility.

...VTX-Al

That worked!


Sent from my iPhone using Tapatalk