User Tag List
Thanks: 0
Likes: 0
Results 1 to 7 of 7
-
09-04-2018, 06:57 PM #1
- Join Date
- Oct 2017
- Location
- Columbia, TN
- Posts
- 222
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Dometic 1350 Refrigerator E0 error code?
Unhooked the 337 this morning upon arriving campground. After setting up discovered the refrigerator was dead. Display showed an error code of E0. Looked up in the manual and said it was a communication error. Did some research on internet and found to disconnect the 12 volt and 120 volt supply. Did this and refrigerator came back on. Has anyone else had this problem? If so is it a one time fluke or should I expect more problems?
-
08-17-2020, 06:34 PM #2
- Join Date
- Feb 2019
- Location
- Brampton, Ontario
- Posts
- 18
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
We just had this E0 error this past weekend. We did the same and turned off all power for about 2 minutes, then it worked again. Just wondering... for you, was it a one-time issue, or does it re-occur?
2019 F250 6.2L 4.30 4x4 CCSB Lariat
2019 FW Reflection 28BH
Hensley Trailersaver BD3F
2011 Ford Flex Ltd
2011 Rockwood Premier 2516G
-
08-18-2020, 05:14 AM #3
- Join Date
- Oct 2017
- Location
- Columbia, TN
- Posts
- 222
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
We only had this happen the one time. Have no idea what caused it.
-
08-18-2020, 05:39 AM #4
- Join Date
- Feb 2019
- Location
- Brampton, Ontario
- Posts
- 18
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Ok. Good to know.
2019 F250 6.2L 4.30 4x4 CCSB Lariat
2019 FW Reflection 28BH
Hensley Trailersaver BD3F
2011 Ford Flex Ltd
2011 Rockwood Premier 2516G
-
04-26-2023, 11:07 PM #5
- Join Date
- Oct 2017
- Posts
- 29
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Happened to me tonight on my 1350 and am so glad I found this thread. Turned off ac / dc power for 3-4 minutes and then turned on power and all worked again.
Anyone have any idea what might have caused the fridge to go in the E0 state and should I be worried about it happening again?
Thanks
-
04-27-2023, 07:29 AM #6
- Join Date
- Dec 2019
- Posts
- 170
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Image from the Dometic 1350 service manual.. I would reseat the connections on the lower board outside .. if issue still comes back then remove eye brow panel inside and reseat that connection as well
The fridge still works “Somewhat” with the E0 error as explained in the image I’ve attached form the service manual
-
04-27-2023, 03:06 PM #7
- Join Date
- Oct 2017
- Posts
- 29
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Trying to get trailer camera wire...
Today, 10:01 PM in Electronics