Installing the EMS surge protector

[Xanmeister]

Does anyone happen to have the diagram of wires that we can look at to install the EMS surge protector on the Momentum 399

[FT4NOW]

I don't have a wiring diagram, but I installed one in my 399. I placed it upstream of the transfer switch and physically I mounted it on the floor next to the converter. I did have to move the converter a few inches to accommodate the EMS. As far as wire, the line coming from the shore power connection disconnects from the transfer switch and goes to EMS input, then I used maybe 1 ft of 6/3 wire to connect the output of the EMS to the input of the transfer switch. If you ever need to return it to stock, your shore power line will still fit without problems. If you have any other questions feel free to ask. I didn't take any pictures, and it's raining so I can't empty out my basement to get in there right now. I ran the data cable to right above the central vacuum next to the breaker panel and mounted the display a few inches above the vacuum.

Sent from my SM-G950U using Tapatalk

[Xanmeister]

Thank you so much for the response. I will let the gentleman know that is doing this for me and hopefully it makes sense. I may have more questions

[gbkims]

Here's a couple links with a bit of general info.
https://wheelingit.us/2017/01/23/rv-...ith-ems-hw50c/

Installing the Progressive Industries EMS-HW50C in my RV (updated) https://www.youtube.com/watch?v=Ckkbv3L91Gk