Slide toppers

**315RLTSinPA** · 10-30-2018, 04:17 PM

It is a dometic awning

**Calbar** · 10-30-2018, 06:05 PM

Originally Posted by Country Campers

Rob
I learned this from @Hunter70 that this can not be done. The awning will rest on or not be able to go over the slide topper.

Brian

Thanks Brian. Just what I thought. The awning already either touches or just touches the top of the slide out so basically no room for a topper on that side.

Thanks,
Rob

**sylvester** · 10-30-2018, 07:31 PM

Originally Posted by Calbar

Thanks Brian. Just what I thought. The awning already either touches or just touches the top of the slide out so basically no room for a topper on that side.

Thanks,
Rob

I have a new M351 have toppers on all slides large awning does touch topper but barely

**colo native** · 10-31-2018, 08:12 AM

Originally Posted by 315RLTSinPA

It is a dometic awning

Thanks, Did you they put any kind of backer on the flange?

**wgreeson** · 10-31-2018, 12:17 PM

We have a new 337 with a topper over the awning with about 3/4" space in between ---dealer installed.

**joesann** · 10-31-2018, 01:52 PM

Had all three installed on our 2018 337RLS. Problem ….. when the curb side (dinning table, loveseat) is out and when you want the main awning out. The awning hits the mounting bracket of the slide topper. When retracting the main awning, it pushes the curb slide in. Dealer who installed them (General Trailer) has adjusted the topper twice. Not hitting a this point. Will see if it stays this way. There was no problem with installing the mounting brackets to the flange. They are a great add-on

**Lampton** · 11-02-2018, 04:39 PM

Would like to see pictures of the slide topper on the Reflection 337RLS.

**colo native** · 11-03-2018, 10:21 AM

Originally Posted by 315RLTSinPA

It is a dometic awning

Is it possible to get a photo of the back side of the flange? Thanks

**315RLTSinPA** · 11-03-2018, 07:08 PM

Originally Posted by colo native

Is it possible to get a photo of the back side of the flange? Thanks

Not until spring since we are closed up and in storage for the winter.

**rgdoorguy** · 04-24-2019, 07:28 PM

Im also having same problem with trying to buy a slide out topper for my 337 grand design they was no help at all when I call them twice, not impressed with them at all. Could I also get pictures of the slide topper and how its mounted to the flange and does the mounting bracket screws get into the rubber seal when slide out is in? Thank you