Reflection 295RL shower curtain replacement

[sharkbait]

I bought the 2019 295RL is September and after my first trip the cheap roll up shower curtain took a crap. The top rail popped off as soon as I towed it. I am considering removing it completely, siliconing the screw holes and just using a simple rod and curtain. Has anyone done anything to theirs? any ideas? how tacky do the holes look once i remove all of the metal around the frame? thanks guys

i attached a stock photo for others to see what it looks like

[Papahoosh]

It happened to me too. I am also looking to see what else can be done.
I think it rolls to the side not up.

[johndeerefarmer]

Mine falls off every time I use it.

[RV7ACR]

Get a tube of clear silicone adhesive from Walmart and silicone the small part that holds the shower curtain rod in place. Mine fell off immediately after I bought my 2500RL last year the silicone has held for a year now and still going strong. I have another post that I discussed this issue. Good Luck hope this helps.

[DaveMatthewsBand]

I bought the 2019 295RL is September and after my first trip the cheap roll up shower curtain took a crap. The top rail popped off as soon as I towed it. I am considering removing it completely, siliconing the screw holes and just using a simple rod and curtain. Has anyone done anything to theirs? any ideas? how tacky do the holes look once i remove all of the metal around the frame? thanks guys


i attached a stock photo for others to see what it looks like

Yea that top bar is like eye level on me and I got tired of ducking under it so I yanked it off and installed a couple of closet rod holders using 3M VHB.
Then I bought a standard shower curtain rod and hung it up. I had to trim a couple feet off the width of the shower curtain but it looks pretty dang good.
We even found some curtain rod hooks that look like flip flops.

I kept the factory top bar so I can superglue it back in place if we ever sell this rig.

Here's a few photos: