JT StrongArm front and rear on Reflection 28BH

[agent2960]

Yes! That one came through. So it looks like the rear installation only has stabilization forward and back and not side to side? Have you been happy with them? Also, by putting that bolt through in place of the removable pin, does that keep you from extending the rear pad down manually before going through the leveling sequence. Or do the rear leveling jacks not operate in the same way as the fronts?

[Superduty]

Yes, no side to side on the rear, only on the front.
They help, but you still can feel movement, to a lesser degree.
The bolt for the rear does not affect the movement of the jack up or down. There is a little slop between the pad and the leg. The bolt is just slightly snug.
I’m happy with them.