User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: Getting into solar and a few ??s
-
03-22-2019, 09:26 AM #1
- Join Date
- Sep 2018
- Posts
- 25
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Getting into solar and a few ??s
Deleted by owner.
Last edited by Clay Richardson; 03-23-2019 at 11:21 AM.
-
03-22-2019, 08:09 PM #2
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
Could use a 50A ATS like klenger did, that would feed L1 or L2 of the CB Panel.
Yes a fuse for Inverter. The MRBF type you have on the battery would probably work as it has a high AIC of 10,000A for 12V. 250A or 300A.
- https://www.bluesea.com/products/519...al_Fuse_-_300A
Both +12V battery cables need to be on the same side of the MRBF fuse, the battery terminal side.
https://www.explorist.life/solarwiri...Ug2772MtD9wFU#- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
Adding a portable Generator
Today, 05:39 AM in Solar Systems and Generators