User Tag List
Thanks: 0
Likes: 0
Results 1 to 5 of 5
-
05-22-2019, 12:01 PM #1
- Join Date
- Sep 2018
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Trying to install a Surge Guard 35550 Hardwire Model - 50 Amp
I have a 2019 315rlts tt 50 amp. I am trying to install the Surge Guard 35550 Hardwire Model - 50 Amp into this unit under the hutch. When I open the area under the "hutch" and look at the AC panel, the supply wire only has three wires; red, black, and white... no green. This is a 50amp unit so I was expecting the 4 wires coming from the exterior plug.
Has anyone installed one of these Surge Guard 35550 Hardwire Model - 50 Amp units successfully? Where is the ground wire?
Thank you,
-
05-22-2019, 02:55 PM #2
- Join Date
- Sep 2018
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Well, I figured it out. The ground wire is a bare copper wire wrapped in brown paper. I thought that the paper was a separator. I was a bit surprised as the ground wire is not nearly as stout as the others.
-
05-22-2019, 03:04 PM #3
- Join Date
- Jun 2018
- Posts
- 2,356
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
Well that good news. Glad you found it.
By the way , welcome to the forum.
Brian
-
05-22-2019, 03:05 PM #4
- Join Date
- Sep 2018
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thank you, Brian.
-
05-23-2019, 03:02 PM #5
- Join Date
- Oct 2016
- Posts
- 1,539
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY