We've now re-hitched three times; twice the re-hitch sequence on the leveling system gave us "System Error".

The sequence documentation on the door label says

  • Turn power on. Unit will say "Unit Level ... Jacks Down".
  • Press the Left and Right buttons at the same time and release, and the unit will return to height at which the auto-level sequence started.


When we powered on the unit (2 of three times), it said "Jacks Up". When we pressed left and right at the same time, the system reported "System Error Press Enter to acknowledge". After pressing Enter, I just ran it manually.

[Edit] Yes, we started autoleveling nose high; the autolevel sequence worked flawlessly.

Any thoughts?
Thanks!
-Al