User Tag List
Results 11 to 20 of 31
-
03-18-2019, 04:13 PM #11
- Join Date
- Feb 2018
- Location
- SW Colorado
- Posts
- 2,696
- Mentioned
- 42 Post(s)
- Tagged
- 1 Thread(s)
"Lippert also told me a can't use a slider hitch with the Turning point pin box"
This is puzzling. With the wedge in place to make the turning point work, nothing is different except the hitch moving back 10" which should make maneuvering even better. The turning point should not be effected. Now there might be a bit more strain on the sliders, but they should be able to handle it. I believe Reese makes a slider kit for the pro series. Perhaps give Reese a call. Did Lippert give you a reason?
Just wondering
Keith2018 Reflection 150 Series 220RK 5th wheel with 6K axle upgrade. B&W 25K OEM Companion, Steadyfast system, 2022 F350 SRW 6.7 King Ranch 8' bed, Trailer reverse lights, rear spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, and Solar
-
03-18-2019, 04:26 PM #12
-
03-18-2019, 04:35 PM #13
- Join Date
- Feb 2017
- Location
- White Bear Lake, MN
- Posts
- 1,488
- Mentioned
- 21 Post(s)
- Tagged
- 1 Thread(s)
X2 on what the video showed - they say 90, but the actual was somewhat less. What was shown, though, would be more than enough. So, time to look at how your hitch is mounted. You don't have many inches to spare. Find the installation manual, and start going over the truck. You may find that the dealer mounted the hitch a bit too far forward, eating up the scant inches you had available for very tight turns.....
(I had a Reese Revolution, which is the same as the Turning Point, on my old 5th and thought it was a great solution to avoid the cost and weight of a slider. But, I have a 6.5 box also ....)2017 Imagine 2670MK
2012 F-150 SCrew, Eco, 4x4 6.5 box
Max. Tow, HD Payload, Airbags, ProPride hitch
(Previous: Jayco 26.5RLS Fifth, Revolution Pinbox)
-
03-18-2019, 04:52 PM #14
Coundn't you try to sell your Reese hitch and get a Curt A16 hitch with a Curt wedge, then you could use the turning point set to swivel and get the 90 degree turning limit. Works great
MarkMark & Cindy, York, PA
2018 Reflection 150 Series 230RL (White)
Curt A16 Hitch, Turning Point Swivel Pin Box, set to Swivel, with Curt Wedge
2019 Ford F250 STX 6.2L with 4.30 Gears, SB CC SRW 4x4, 18" Wheels, 3192 Payload, 15,000 Towing Capacity, Fifth Wheel Prep & Camper Package, Ultimate Trailer Tow Camera, Factory Ordered
Prev TV: 2016 F150 3.5L Supercab with 6.5' bed, 2167 payload, LT Tires, and Air Lift 5000 air bags set to 15lbs
-
03-18-2019, 07:17 PM #15
- Join Date
- Feb 2018
- Location
- SW Colorado
- Posts
- 2,696
- Mentioned
- 42 Post(s)
- Tagged
- 1 Thread(s)
My Reese R20 Titan has settings on the head (actually the rocker assembly). One setting moves it back about 2' to 4" from the forward setting. It assembles in 3 pieces so I know it can be adjusted. Also Reese recommends specific wedges that fit tighter to their heads. I think they are model specific.
Hope this helps2018 Reflection 150 Series 220RK 5th wheel with 6K axle upgrade. B&W 25K OEM Companion, Steadyfast system, 2022 F350 SRW 6.7 King Ranch 8' bed, Trailer reverse lights, rear spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, and Solar
-
03-18-2019, 09:31 PM #16
- Join Date
- Feb 2017
- Location
- White Bear Lake, MN
- Posts
- 1,488
- Mentioned
- 21 Post(s)
- Tagged
- 1 Thread(s)
Reese's wedges are for their Revolution, so may not be applicable to the Turning Point. But it would be good to see if Lippert makes wedges for specific hitches, like Reese does. My old 16K Titan unfortunately doesn't adjust forward or back...but maybe the more recent ones all do. Something to check out.
2017 Imagine 2670MK
2012 F-150 SCrew, Eco, 4x4 6.5 box
Max. Tow, HD Payload, Airbags, ProPride hitch
(Previous: Jayco 26.5RLS Fifth, Revolution Pinbox)
-
03-19-2019, 05:30 AM #17
Why not order the wedge for the Reese Pro Series hitch and remove the bolts from the pin box that allow it to rotate. If there is any for/aft adjustment move the hitch to the rear as others suggested. I know three people that are towing a 150 Series Reflection with a 5.5' box. I'm not sure if they can do a 90 degree turn but the setup has been working for them.
Wedge part number 30850. This should work. You could call Lippert or Reese to confirm.
BobLast edited by grampscamper; 03-19-2019 at 05:36 AM.
2023 Reflection 150 Series 260RD
2022 Ford F350 SRW CC 4X4 Lariat 6.7 camper package, B&W Companion RVK3300
-
03-19-2019, 05:59 AM #18
Hi Bob,
Could you get a measurement from the other F150s towing 5th wheels with a 5.5 ft box that @bikerdude could use as a reference?
Something easy like front of box to centre of hitch?
RobCate & Rob
2015 Reflection 303RLS
-
03-19-2019, 06:22 AM #19
Hi Rob,
I'll see one of them this week. If they have their hitch installed I'll get a measurement. If not I'll get a measurement to the rails. They have a 2014 Ford with a 5.5' bed and a Curt A16 hitch.
Bob2023 Reflection 150 Series 260RD
2022 Ford F350 SRW CC 4X4 Lariat 6.7 camper package, B&W Companion RVK3300
-
03-19-2019, 01:11 PM #20
- Join Date
- Mar 2019
- Location
- Myrtle Beach, SC
- Posts
- 7
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I have tried both the Lippert Turning point wedge and the Reese wedge. Neither will allow the greater turning radius. THanks for the suggestion though.
Speed Rating?
Yesterday, 10:37 PM in Tires